Water-cooled package units are simple and robust by providing individual air conditioning systems per a group of separate rooms or floor with lower maintenance cost and easier operation.
THERMALCOOL water-cooled package units are simple and robust by providing individual air conditioning systems per a group of separate rooms or floor with lower maintenance cost and easier operation.
Power supply available is AC 380V/440V, 50Hz/60Hz and 3Ph. Range of cooling capacity available is from 50 kW to 240 kW and the refrigerant is R407C, R404A, R410A and R134A. We are also able to make customized design according to your special requirements. Variable Frequency Drive (VFD) is optional.
Our units are designed with scroll compressor for the dependable, efficient and durable performance. Each compressor has independent refrigerant circuit and individual fusing. Each refrigerant circuit is provided with discharge and suction pressure transducers for monitoring and easy diagnostic.
The condensers are designed with counter flow arrangement between water and refrigerant for high heat transfer efficiency. Corruption resistance copper nickel tube B10 or B30 as optional for the marine environment.
The evaporator coils are designed with professional software for 4 row or 6 row with row split, each refrigerant circuit covering entire coil face in 2-compressor units. In 4 compressor units, the coil is row split and has intertwined circuiting to activate entire coil face when any compressor is started.
DX cooling coils shall be ARI certified and constructed of seamless copper tubing mechanically expanded to the aluminum fins or cooper fins. Blygold coating or E-coating is optional to protect aluminum fin or copper fin during long term exposed if the units are intended for marine environment.
Fans are constructed to act as a plenum. The efficient and quiet airfoil blade can keep the discharged velocity and lower noise and high efficiency.
Bearing lubrication lines are brought closer to the front of the unit for the easier maintenance. Fan is mounted on the spring vibration isolators and connected to the inlet side with a canvas flexible connection to get minimum vibration and noise transmission.